Software performance error The software attempted to perform an unexpected operation. Electromagnetism study guide answ. Software defective Internal parameter incorrect Insufficient working memory When this SC occurs, the file name, address, and data will be stored in NVRAM. This information can be checked by using SP7-403.

1. Toshiba Studio 28 Copier

Note the above data and the situation in which this SC occurs. Then report the data and conditions to your technical control center. Ok, that's the 'OFFICIAL' meaning, in reality, EVERY TIME I'v had this, it took a PM or at least a Developer change and a good idea to replace the Drum and Drum Cleaning Blade too, Be sure and run the setups too. Enter the service mode. Clear modes, 1,0,7 and hold down the Clear/Stop key. Press COPY SP on the display and enter the following info.

Toshiba Studio 28 Copier

SP2001 = 1480V SP2201 = 600V SP2801 (after new developer is installed) SP2805 (after new drum and developer is installed) SP3001-2 (after cleaning the ID sensor and/or replacing the drum) SP7804 SP7807 Good luck. Sep 04, 2009.